Above: Exquisite floral door handle by Carl Close Jr., Hammersmith Studios hammersmithstudio.com
Brian D. Coleman describes the resurgence of fine work bringing us fireplace tools, stove hoods, garden gates, and metal art tiles.
Copper, brass, and iron lend richness and artisanry to the home, and such objects were an intrinsic part of the Arts & Crafts interior. In the U.S. at the beginning of the 20th century, such artist–craftsmen as Samuel Yellin resurrected an old tradition of craftsmanship in metal. Today’s artisans are similarly talented.
Robert Trout, for an example, was inspired by Elbert Hubbard and has been a Roycroft Renaissance Master Artisan since 1998, specializing in hand-hammered copper. Trout is mindful of Hubbard’s “head, heart, hands” motto, putting his design, artistry, and skill into each piece. Objects include chargers and plates, picture frames, vases, letter openers, and candlesticks. Trout’s work is shown in the Copper Shop Gallery in East Aurora, NY www.coppershop.co.za or by emailing him at firstname.lastname@example.org.
In true Arts & Crafts tradition, New Mexico metal artist Christopher Thomson is inspired by nature and the monumental rock formations of the Southwest. www.ctiron.com Making everything from candlesticks and chandeliers to tables and chairs from white-hot iron and bronze, which allows the hammering, stretching, and bending that creates the design. He uses ancient symbols, as in the Tree of Life firescreen that celebrates the connections between humans and nature.
Charles Bushere of Bushere & Son Iron Studio grew up in southern California and from an early age was taught to appreciate Batchelder, Bauer, and other early California artists and potteries. It’s no surprise that his fine Peacock firescreen was inspired by the design on a Batchelder tile. One screen can take over 55 hours to make. www.bushereandson.com
Decorative tiles were a staple of Arts & Crafts design. Jay Gibson of Metaphor Bronze produces solid cast-bronze tiles in designs inspired by nature. www.metaphorbronze.com Each tile is patiently sculpted by hand, in oil clay; then a rubber mold is made and hard urethane patterns cast, which are used to make a sand mold from which the bronze is finally cast. The stylized flowers and tendrils of Gibson’s ‘Aubrey’ line are a favorite among bungalow owners. The metal tiles look great in backsplashes, bathrooms, and on the porch.
Metal fittings from fences to fountains often anchor the garden. Conservation and reproduction both are offered by Heritage Metalworks, says co-owner Matt White. www.heritage-metalworks.com When Winterthur asked him to reproduce an antique armillary sundial that had been damaged in a winter storm, he approached the project methodically, measuring the original and creating a mold. The cast mold was filled with wax, covered with sand and slurry, and hardened, then heated in a kiln until the wax melted away to leave a shell used to receive molten bronze. After the metal cooled, the shell was carefully hammered off and a newly cast, 70-pound sundial emerged. A popular item, it’s available for $4500 in reproduction.
Finish gives metal objects protection and their beauty. Lowell Chaput has been forging iron for over thirty years. www.chaputmetalsmith.com To achieve a patina of age for an interior project, Chaput has a several-step process. After forging, he sand-blasts a piece to raw metal and sprays it with a mixture of hydrogen peroxide and liquid dish-soap to produce a dark red-rust finish. After it dries, the metal is rinsed with fresh water and baking soda to neutralize the acids, then oiled and waxed.
Other Sources to Visit
- 12th Ave. Iron www.12thavenueiron.com
- Ararat Forge www.araratforge.com
- Auburn Sleeper Metalsmith email email@example.com
- Harris Metalsmith Studio www.harrismetalsmith.com
- Jefferson Mack Metal www.mackmetal.com
- Saint–Gaudens Metal Arts www.vsgmetalarts.com
- Samuel Yellin Metalworkers www.samuelyellin.com
- Ronald VanOstrand www.ronvano.com
- Winnespesaukee Forge www.irontable.com